Products

Tool catalogue

Every tool below is listed with the status it actually has today. A tool is only marked available when a customer can install and use it from the current release.

Read this before buying for a specific tool

Tools marked Available are installed from the Install Tools page of the Windows application, which finds your NX installation for you. Everything available today targets NX 12.0. If you are buying for one particular tool, or for a different NX version, please contact us first so we can confirm it will work for you.

RenameCAMops

Available

Bulk-rename CAM operations inside NX without editing them one at a time.

NX versions: NX 12.0
Availability: Installable from the current release.

Learn more

An NX add-in that renames CAM operations in bulk instead of one at a time. It is installed by the Install Tools page of the application, which detects your NX installation and puts the add-in where NX will load it.

Installation note: Installed from the Install Tools page. Windows will ask for administrator rights, and NX must be closed during installation. An NX 10 build is not available yet, so the application reports NX 10 as awaiting it.

NX 12 Classic Toolbar

Available

Restores the classic toolbar interface in NX 12.

NX versions: NX 12.0
Availability: Installable from the current release.

Learn more

Re-enables the classic toolbar layout in NX 12.0. It is installed by the Install Tools page of the application into the NX program directory, where NX loads it at start-up.

Installation note: Installed from the Install Tools page. Windows will ask for administrator rights, and NX must be fully closed during installation.

Sheet Up Sheet

Available

Setup-sheet output for NX CAM programs.

NX versions: NX 12.0
Availability: Installable from the current release.

Learn more

Generates setup sheets for NX CAM programs. It is installed by the Install Tools page of the application as a Post Builder event handler together with the post list NX reads.

Installation note: Installed from the Install Tools page. Windows will ask for administrator rights, and NX must be closed during installation.

Post Processor

Coming soon

NX post processors for supported machine configurations.

NX versions: Not confirmed
Availability: Announced. No build is available yet.

Learn more

Post processors generated with Siemens Post Builder. A post processor is one product per machine rather than a single download, so the application lists the machines individually. None of them can be installed yet.

Installation note: Listed per machine in the application. No machine is installable yet.

NX Role Install

Coming soon

Installs a prepared NX role and dialog configuration.

NX versions: Not confirmed
Availability: Announced. No build is available yet.

Learn more

Deployment of a prepared NX role so that a workstation picks up a consistent interface configuration.

Cavity Mill Mixed Cutting

Coming soon

Mixed cutting behaviour for cavity milling operations.

NX versions: Not confirmed
Availability: Announced. No build is available yet.

Learn more

A cavity-milling utility. No build is available yet.

Compatibility

Supported NX versions

A tool is only claimed for an NX version when a build for that version exists.

NX version	Status	Detail
NX 12.0	Supported	The primary target. Every tool build that currently exists is built for NX 12.0.
NX 10	Depends on tool	Support depends on the individual tool and build. No NX 10 tool build is available at present — please contact support before purchasing for NX 10.
Other NX versions	Not currently supported	Not currently targeted. Contact support to ask about a specific version.

See pricing Ask about a specific NX version

Not sure what you need? Read the FAQ.